ANSI/TIA/EIAA Approved: May 16, TIA/EIAA. Administration Standard for. Commercial Telecommunications. Infrastructure. TIA/ EIAA. This guide is intended to be used as a reference to the application of the. ANSI/ TIA/EIA A Standard. It in no way reflects all the necessary infor-. ANSI/TIA/EIA Administration Standard for the. Telecommunications Infrastructure of. Commercial Buildings. Distributed by NDS INFORMATION- TELECOM.
|Published (Last):||3 February 2007|
|PDF File Size:||17.72 Mb|
|ePub File Size:||19.14 Mb|
|Price:||Free* [*Free Regsitration Required]|
Any moves, adds, and changes MACs must be documented with a change order. Labeling must be logical and consistent, across all locations, matching the project drawings.
Requirements For Labels All labels must use a permanent identifier that can be easily traced — that is, a useful numbering scheme. MACs must be recorded and updated in the permanent records.
structured cabling test Chapters 9,10,11,12,13 Flashcards Preview
This particular cable would have a corresponding label on the other end the data center end, in this case which would read:. Wire Color Coding While recommended, color coding is not required, and compliant coding may be accomplished using color labels or color bands.
These principles are sia translated into specific requirements. This scheme must be logical in its organization, using alphanumeric characters for ease of reference.
All labels must meet requirements for legibility, defacement, and adhesion, specified in UL The following is the color coding scheme recommended in B:. The following is the color coding scheme recommended in Eja PVBX, LANs, and individual computers Yellow — Auxiliary circuits, such as alarms and security systems Red — Key telephone systems termination Record Keeping Requirements Drawings and documents must be secured and backed up by the building administration.
ANSI TIA EIA – 606A Guide – English
Labeling must be easily read, durable, and capable of surviving for the life of the component that was labeled. The labeling system, and the identifiers used, must be agreed upon by all stakeholders. While recommended, color coding is not required, and compliant coding may be accomplished using color labels or color bands.
Each cable and each pathway must be labeled on each end, and each label should identify the termination points of both ends of the cable.
ANSI/TIA/EIA CABLING STANDARDS
All jack, connector, and block hardware may be labeled on anwi the outlet or panel. A04 — As before, the first element identifies the cabinet location, but this time for the far end of the cable.
It identifies the termination point for both ends of the cable, with the near end shown first. Labels for station connections may appear on the face plate. This particular cable would have a corresponding label on the other end the data center end, in this case which would read: This is port The labeling principles that underlie B include the following: Labeling should be pervasive; cables and connecting hardware should be labeled, but so should conduits and firestops, grounding and bonding locations, racks, cabinets, ports, and telecommunications spaces.
The labeling scheme must identify the associated physical locations building, room, cabinet, rack, port, etc. Permanent records must 60a all identifier information.
All labels must match up with the permanent record. The following is a simple example of a cable identifier.